|
RUSCON- DUMP TRUCK
|
 |
RUSCON- SILAGE & GRAIN TRAILERS
|
 |
 |
•Models: 10, 12, 14 tonne tandem
•6mm steel floors
•All hydraulic brakes and lights
•Double 3 stage rams
•Tapered sides
•Rugged body
•All tandem axle to suit rough terrain
•Four brake rams fitted
•Double heavy duty channel iron chassis
|
•Auto Silage Gate
•Tandem Axle
•Fixed grain sides and removable silage sides
•Standard is fitted with lights
•Hydraulic brakes
•Mesh front
•Mesh and solid silage gate
•Grain door with grain shoot and seperate
Cross Member Box Section for both doors.
|
|
BATESON TRAILERS
|
|
BATESON TRAILERS
|
 |
 |
•Model 263H with mesh extensions
•Gross Weight: 2600kg
•Approx. Capacity: 1850kg
•Body Length: 3m 10'
•Body Width: 1.8m 5'10"
•Platform Height: 66cm 26"
•Electric hydraulic pumps
•Battery box provided
|
•Model 3543 with galvanised steel sides
•2 ton winch
•Alloy treadplate floor
•Spear wheel and carrier and heavy duty jockey wheel.
•Gross Weight: 3500kg
•Approx. Capacity: 2760kg
•Body Length: 4.3m 14'
•Body Width: 2m 6'6"
•Platform Height: 70cm 27"
|
|
BATESON TRAILERS
|
|
BATESON TRAILERS
|
 |
 |
•Model 45LT with mesh extensions
•Gross Weight: 3100kg
•Approx. Capacity: 2250kg
•Body Length: 10' by 5'8" by 6'
•Body Height: 45HB 7'
STANDARD EQUIPMENT:
•Side inspection door
•One piece alloy treadplate floor
•Avonride rubber suspension
•Auto reversing brakes
•600 by 16 landrover wheels and tyres
•Fully galvanised chassis and frame
OPTIONAL EQUIPMENT
•Removable sheep decks
•Universal cross division gate
•One piece cattle gate
•Interior lamp
•Hitch lock
•Spare wheel and carrier
|
•Model 316
•Gross Weight: 3100kg
•Approx. Capacity: 2000kg
•Body Length: 12' by 5'8
•Body Height: 6'
STANDARD EQUIPMENT:
•Roof rack and ladder
•Sliding side ventilators
•Twin side inspection doors
•600 by 16 landrover wheels
•Avonride axle with 250 by 40 brakes
•Front louvre ventilator
OPTIONAL EQUIPMENT
•Fully folded decks
•Deck gates
•Cattle division
•Interior lamp
•Hitch lock
•Spare wheel and carrier
|
|
NC - DUMP TRAILERS
|
|
|
 |
•Can be used with or without tail-door
•Lever system door
•6mm thick door
•Optimum spacing of floor runners
•5mm thick steel side panels
•Side panels supported by horizontal and bulge supports.
•Low and wide for stability
•Two three stage hydraulic rams tilt to 70 degrees
•Rear lights protected by steel guard.
|
|
NUGENT TRAILERS - 10' X 5'6"
|
|
NUGENT TRAILERS - 12' X 5'9"
|
 |
 |
The 10' x 5'6" Nugent trailer is easily towed and manoeuvred. It has a superb strength and is robust enough for any type of farmer. The 10' x 5'6" has a capacity of 2.7 ton and a split front access door. It offers a headroom of 1770mm.
•5 leaf spring
•Aluminium guide gate
• 650 x 16 10 ply tyres
|
The most popular of the Nugent range the 12' x 5'9" is robust and built with precision and style. The 12' x 5'9" offers 6' of headroom and comes as standard with galvanised dividing gates. The Nugent dividing gates have 3 easy adjustable settings leaving them suitable for all types of farmers. The 12' x 5'9" has reinforced hollow sections on either side creating extra strength. The roof sections on either side creating extra strength. The roof of the Nugent 12' x 5'9" is also reinforced.
•750 x 16 12 ply tyres
•Optional removable sheep decks
•Heavey duty jockey wheel
•Deep draw bar
|
|
NUGENT TRAILERS - 14' X 6' TRI-AXLE
|
|
NUGENT TRAILERS - FLAT-BED RANGE
|
The 14' x 6' Tri-Axle trailer is the largest of the Nugent livestock range. It comes as standard with 185 x 70 10 ply wheels. It is constructed with an aluminium tread plate floor, which is fitted as one solid piece, eliminating weakness. The Nugent tri-axle can be fitted with decks if required.
|
 |
•Easily pulled by a car
•Fitted with 185 x 70 R13 tyres
•3.5 ton capacity.
|
•Our flat-bed range is designed for hire industry •Designed for professional, every day, on going usage. •Robust construction for strength and durability. •Meets all the health and safety regulations. •Fully galvanised and constructed as one whole piece avoiding bolting. •A range of optional, additional extras are available, which can be added at any stage.
|
|
NUGENT TRAILERS - FB5 SERIES 8' X 5'
WITH MESH EXTENSIONS
|
|
NUGENT TRAILERS - FB5 SERIES10' X 6'2"
|
 |
 |
•Fully galvanised
•Mounted on 5 leaf springs
•Details to design
•Quality components produce a perfect balancing towing trailer
•Avonride beam axles.
•Highest quality of wheels and tyres.
•Fully welded and galvanised chassis.
•Suitable for towing behind a car or any larger vehicle.
•Constructed to take any of the Nugent optional, additional extras.
•trailers come standard with removable drop sides, spare wheel and headboard.
Optional Features:
Aluminium Floor
Ramps & Props
Ladder Rack
Mesh Side Extensions
|
•Fully galvanised
•Mounted on 5 leaf springs
•Details to design
•Quality components produce a perfect balancing towing trailer
•Avonride beam axles.
•Highest quality of wheels and tyres.
•Fully welded and galvanised chassis.
•Suitable for towing behind a car or any larger vehicle.
•Constructed to take any of the Nugent optional, additional extras.
•trailers come standard with removable drop sides, spare wheel and headboard.
Optional Features:
Aluminium Floor
Ramps & Props
Ladder Rack
Mesh Side Extensions
|
|
NUGENT TRAILERS - TIPPING TRAILERS
|
 |
•Fully welded and galvanised chassis
•Removable drop sides, head board and ladder rack.
STANDARD FEATURES:
Avonride beam axels.
Hydraulic tipper ram by an on-board heavy duty 12 volt batters
Mud flaps
Heavy duty jockey wheel
Integrated coupling lock
High density plywook platform - resin coated
Full regulation lighting
|
|
OPTIONAL FEATURES:
Aluminium Platform Cover
Spare Wheel
Mesh Side Extensions.
|
|
|
 |
